HAWAII 4RG™
IR and Visible FPAs
The 4096×4096 pixel HAWAII-4RG™ (H4RG) is the next generation, state-of-the-art readout integrated circuit for visible and infrared instrumentation in ground-based and space telescope applications.
  • Large (4096×4096 pixel) array with either 10 µm or 15 µm pixel pitch.
  • Compatible with Teledyne Imaging Sensors (TIS)  HgCdTe infrared (IR) and silicon PIN HyViSI™ visible detectors, providing sensing of any spectral band from soft X-ray to 5.5 µm.
  • Substrate-removed HgCdTe enhances the J-band QE, enables response into the visible spectrum (70% QE down to 400 nm) and eliminates fluorescence from cosmic radiation absorbed in the substrate.
  • Reference rows and columns for common-mode noise rejection.
  • Guide window output – windowing with simultaneous science date acquisition of full array. Programmable window which may be read out at up to 5 MHz pixel rate for guiding. Readout is designed to allow interleaved readout of the guide window and the full frame science data.
  • Selectable number of outputs (1, 4, 16, 32 or 64) and user-selectable scan directions provide complete flexibility in data acquisition.
  • Built with modularity in mind – the array is 4-side-buttable to allow assembly of large mosaics of 4096×4096 H4RG modules.
  • Fully compatible with the TIS SIDECAR™ ASIC Focal Plane Electronics
Published Information – Cleared for Public Release by the DoD’s Office of Security Review (Case #12-S-1869).
HAWAII 4 K x 4 K 10 micron pixels (H4RG-10) FPA.